Create Pour Card — Velantra Site

Step 2 — Select Element

Drawing: STR-COL-22 has 12 elements. Select the element you are about to pour.

Floor:

Block A · FL-02

COL-A1-FL02

Column · Grid A1

M250.71 m³In progress

Block A · FL-02

COL-A2-FL02

Column · Grid A2

M250.71 m³Not started

Block A · FL-02

SLB-A-FL02

Slab · Full floor

M3018.31 m³Not started

Block A · FL-02

BM-A-B1B3-FL02

Beam · B1–B3

M251.02 m³Not started

Block B · FL-02

COL-B1-FL02

Column · Grid B1

M250.71 m³Not started

Block C · FL-01

COL-C2-FL01

Column · Grid C2

M250.71 m³Pending

Step 3 — Area to be Poured & Grade

Review the selected element details below, then set the pour area, height range and date.

Selected Element Details

Element ID

COL-A1-FL02

Element Type

Column

Grid / Location

B3 · Core · G+1

Drawing

STR-COL-22 Rev 2

Concrete Grade

M25

Dimensions (L×B×H)

0.45 × 0.45 × 3.50 m

Total Volume

0.71 m³

Exposure

Moderate · 30mm cover

Mix Design Ref

MD-2026-M25-001

BOQ Item

RCC-COL-M25-BLKC

← Change element

Area to be Poured (describe the zone / portion)

Partial Pour — Start Height (m) from base

Partial Pour — End Height (m)

Pour height: 1.16 m · Volume this pour: 0.24 m³

Planned Pour Date

Planned Pour Time

Site Engineer

Step 4 — RMC Volume Calculation

Element Dimensions (from drawing — read only)

Length (m)

0.45

Breadth (m)

0.45

Pour Height (m)

1.16

No. of elements

Wastage %

Truck capacity (m³)

6 m³

Dimensions are locked from the element defined in Office Mode. Pour height is auto-calculated from start/end heights in Step 3.

Calculated Order

Net volume0.20 m³

+ Wastage (5%)0.01 m³

Order quantity0.21 m³

No. of trucks1 truck

Cube samples IS 456 Cl.15.2 1 set

IS 456 Cl.13.1: RMC must be placed within 90 min of batching. Trucks to be scheduled accordingly.

Step 5 — Pre-pour Checklist IS 456:2000

Complete all checks before requesting Client Engineer approval. Mark NOK to raise a remark.

Check Item	Clause	Result	Remark
PRE-POUR CHECKS
Survey / Layout Cl.11
Formwork — dimensions, tightness & alignment Cl.11.1
Reinforcement — placement, laps & BBS check Cl.12.1
Cover Blocks — position & size verified Cl.12.1
Embedments — pipes, conduits & MEP in position Cl.11.2
Sleeves / Inserts — all per drawing Cl.11.2
Cleanliness — debris & standing water removed Cl.11.3

Step 6 — Site Photo

Attach a photo of the element / formwork before pour. This is attached to the pour card for Client Engineer review.

Photo of Formwork / Element

Additional Photo (optional)

Photo Caption / Notes (optional)

✅

Pour Card Created & Submitted!

PC-2026-04-029 has been created and sent to Client Engineer A. Mehta for approval.

Pour Card

PC-029

Element

COL-B3-G+1

RMC Volume

0.24 m³

Status

Awaiting Approval

Go to Pour Entry → Back to Dashboard 📄 View Report Create Another

Step 1 — Drawing Selected

Step 2 — Select Element

Step 3 — Area to be Poured & Grade

Step 4 — RMC Volume Calculation

Step 5 — Pre-pour Checklist IS 456:2000

Step 6 — Site Photo

Pour Card Created & Submitted!